Stop cutting lumber blocks for bracing and start forming faster with the reusable Edge Form Bracket. The one-piece plastic design is a wedge-shape that braces tilt-up edge forms. The Edge Form Bracket has a 6” side for thinner slabs (6” to 8”) and a 7” side for thicker slabs (8” to 12”). Both sides of the Edge Form Bracket have a flat surface with three holes for attachment Once placed, the flat surfaces can be nailed, screwed or glued to the lumber and concrete. The tops of the Edge Form Brackets should always be positioned below the overall form height so they do not interfere with concrete screeding or finishing. The Edge Form Brackets are removed when forming is complete, then cleaned, stacked and saved for the next project. 04/20 Edge Form Brackets can be nailed, screwed or glued to the lumber or concrete. Edge Form Brackets can be cleaned, stacked, saved and reused.